Global▼

English
中文
Русский язык
Español
بالعربية
VR
CLOSE

Products

What are you looking for?

+86 18892628347

info@evokepump.com

We provide you with service support during the product sales process.
Including a full range of 1-to-1 tracking services, provide technical assistance support and professional training, practice our brand purpose, ensure the safety and quality of products, to solve your worries.

If you need help
please feel free to contact us.

Click to visit the Contact Us page
where you can send us a message.

Contact us

Here's an example:

Please refer to the product manual for installation and maintenance

  • Installation environment
    Installation and maintenance precautions

    1. The pump must be installed in a dry, cool, well ventilated, and the ambient temperature will not be below 0ºC (frost-free) place. Special attention: the inlet pipe diameter shall not be less than the outlet pipe diameter.
    2. Before connecting the pump with the pipeline, confirm the direction through the water arrow on the pump shell. In order to ensure the tightness of the pipeline connection, install rubber gaskets or other sealing materials between the flanges.
    3. For the installation site of the pump must have sufficient space to ensure the normal flow of air and the later disassembly and maintenance of the pump.

  • Noise and vibration reduction
    Installation and maintenance precautions

    The vibration and noise of the equipment is an inevitable problem, but effective measures can greatly reduce the vibration and noise and ensure the safe operation of the equipment. Therefore, for the noise and vibration reduction of the pump, we recommend the installation of shock absorbers or shock pads, according to the industry's experience in vibration reduction, it is stipulated that:
    It is recommended that the pump with motor power greater than 2.2kW need to consider installing shock absorbers or shock pads.

  • Maintenance
    Installation and maintenance precautions

    The pump should be regularly inspected and maintained. If the pumping medium contains complex substances, the wear of the seal should be checked. If the pump is not used for a long time, an appropriate amount of silicone oil should be injected between the shaft and the shaft seal to prevent corrosion and adhesion of the shaft seal.

You might also be interested in
LEAVE YOUR MESSAGE